MODEL | F1 | F2 | |
Specification / Configuration | 150 mm ~ 1000 mm | 250 mm ~ 2000 mm | |
Working length | 25 mm ~150mm | 25 mm ~205mm | |
Working width | 17 mm ~ 60 mm | ||
Working thickness | – | ||
Vertical type capacity 25 x 60 x 400 | – | ||
Horizontal type capacity 22 x 50 x 350 | – | ||
Shaper’s table width | 15 KW | ||
Power of finger spindle | 11.25 KW / S | ||
Power of cut-off saw | 1.5 KW | ||
Power of scoring saw | Inverter 7.5KW | ||
Power of table movement | 90 ~ 120 / min | 60 / min | |
Shaper max. cycle speed | Single liquid type injection spreader | ||
Glue spreader type | – | ||
Shaper wood cutting monitoring device | · | ||
Shaper abnormal detection system | – | ||
Pneumatic high – speed solenoid valve | o | ||
Safety fence device | 6.2 M | ||
Finger assembler working length | 5.625 KW | ||
Power of feeding inverter | 7.5 KW | ||
Power of hydraulic pump | 3.75 KW | ||
Power of cut-off saw | 9 | ||
Assembler max. working cycle | · | ||
Auto cut-length setting device | · | ||
Assembler abnormal detection system | · | ||
6.5M chain type pre-joint feeding system | · | ||
Servo fully auto flipper device | · | ||
Infinite finger joint assembler machine | – | ||
*All specification and design characteristics shown in this catalogue are subject to change without prior notice |
- = Standard / o(—) = Optional / – = No configuration / F = Fully automatic configuration /
- H = Configure the pre-joint system / B = Configure rear feeding conveyor system /
- C = Simple Conveyor Configuration / 2L = Double finger assembler configuration