WIDE BELT SANDER TYPE DWB

OPTIONAL EQUIPMENT:

01 MICRO-COMPUTER CONTROLLED THICKNESS SETTING

-The conveyer table elevation can be accurately controlled by micro-computer with digital display of thickness value. The desired thickness can be preset for convenient operation.

02 SANDING BELT OSCILLATION CONTROLLED BY PHOTOCELL SENSOR

-The machine employs photocell sensors to control the belt oscillation motions-without any dust entering problems. Oscillating sanding not only ensures excellent surface quality, but also extends service life of the belt. In case of insufficient air pressure, sanding belt not mounted, or sanding belt not properly tensioned, the machine stops automatically.

03 RP TYPE SANDING HEAD

-This series of machines provides single, two and three head configurations to choose from. Also, a choice of contact drum or platen head is available. For mass production, a multi-head configuration is suggested.

04 BODY ACTIVATED EMERGENCY STOP BAR

-This emergency stop bar is equipped at the infeed end. Once it is touched, the conveyor table will lower automatically for safety protection for the operator and the machine.

05 SYNCHRONIZED MICROMETRIC ADJUSTMENT FOR PRESSURE PLATE

-The device permits a synchronized elevation for pressure plate, ensuring high accuracy adjustment.

06 PANEL CLEANING BRUSH ROLLER (OPTIONAL)

-The panel cleaning brush roller is provided at the outfeed end of the conveyor belt for workpiece dust removal. A dust hood for the panel cleaning brush facilitates dust collection

07 AIR BLOWING SANDING BELT CLEANING DEVICE (OPTIONAL)

-Effective cleaning of the sanding belt is provided by an oscillating air blower located over the idler roller.