MODEL | H | F |
Specification / Configuration | 150(120) mm ~ 800(1000) mm | |
Working length | 25 mm ~150(205)mm | |
Working width | 15 mm ~ 90 mm | |
Working thickness | 62.4 M/min | 52 M/min |
Vertical type capacity 25 x 60 x 400 | 41.6 M/min | 41.6 M/min |
Horizontal type capacity 22 x 50 x 350 | 660 mm | |
Shaper’s table width | 22.5 KW/ S (37.5KW/S) | |
Power of finger spindle | 11.25 KW / S (15KW) | |
Power of cut-off saw | 2..25 KW | |
Power of scoring saw | Servo 2.9KW | |
Power of table movement | 8 / min | |
Shaper max. cycle speed | Single liquid type injection spreader | |
Glue spreader type | ● | |
Shaper wood cutting monitoring device | ● | |
Shaper abnormal detection system | ● | |
Pneumatic high – speed solenoid valve | o | |
Safety fence device | 6.2 M | |
Finger assembler working length | 7.5 KW | |
Power of feeding inverter | 7.5 KW | |
Power of hydraulic pump | 3.75 KW | |
Power of cut-off saw | 9 | |
Assembler max. working cycle | ● | |
Auto cut-length setting device | ● | |
Assembler abnormal detection system | ● | |
6.5M chain type pre-joint feeding system | ● | ● |
Servo fully auto flipper device | – | ● |
Infinite finger joint assembler machine | – | |
*All specification and design characteristics shown in this catalogue are subject to change without prior notice |
- = Standard / o(—) = Optional / – = No configuration / F = Fully automatic configuration /
- H = Configure the pre-joint system / B = Configure rear feeding conveyor system /
- C = Simple Conveyor Configuration / 2L = Double finger assembler configuration